Compact retractable hoods with air duct for the kitchen – consider their features, selection criteria, and installation details

In this article, we will talk with you about such a topic as: Compact retractable hoods with air duct for the kitchen – consider their features, selection criteria, and installation details.

To create a favorable atmosphere in the kitchen while preparing food, such a technique as an extractor hood will help. It will provide good air circulation, “pulling” fats, fumes, soot, and unpleasant odors generated during cooking from the room.

The absence of combustion products in the air is beneficial not only for health and well-being but also for the preservation of the appearance of the kitchen – fatty deposits will not cover walls, ceilings, furniture. The hood with an air duct for the kitchen successfully copes with the task of cleaning the air. Recirculating counterparts are slightly inferior to them in this.

The retractable type of hood is chosen when you want to save space and use it to the maximum. To tell about the main parameters, characteristics, selection criteria, as well as the installation features of these household appliances, the purpose of this material.

Pull-out models of kitchen hoods have several names. So, these devices are often called telescopic, folding, or sliders. The principle of operation of such a technique is completely similar to other types of exhaust devices that provide good air circulation. Telescopic models are convenient due to their compact size and the peculiarity of the block extension, which increases the retraction area.

Compact retractable hoods with air duct for the kitchen - consider their features, selection criteria, and installation details

The installation of kitchen hoods in studio apartments is especially important, since the preparation of food takes place, in fact, in the same room where the bedroom is located, and it is not very pleasant to sleep, breathing air saturated with smells, soot, and burning.

 

Functionally, the pull-out hood with an air duct is not inferior to analogs. Their manufacturers are constantly striving to further reduce the size of these devices. This allows the sliders to become more compact and fit into any interior. Saving space in the kitchen, pull-out models of hoods have decent power.

Pull-out hoods with air duct for kitchens

Slider hoods can be installed in any kitchen: large, small, combined with a room (studios). The main feature of the design of such devices is in the pull-out panel. That makes them very productive with their compact size. When the appliance is turned on, the panel is pulled out, and when it is turned off, the hood is almost invisible. The device, like most other types of hoods, can operate in two modes:

  • direct when the device is connected to a ventilation shaft;
  • recirculating, in this mode the air is purified by passing through filters and returning to the room.

The design of most models has two filters: the first cleans the air stream from grease vapors (grease filter), the second, installed inside, eliminates odors (charcoal filter).

When using a retractable hood in a recirculating mode of operation, it must be borne in mind that its efficiency will decrease, and you will also have to periodically change the carbon filter, on average, once every six months.

Pull-out hoods with air duct for kitchens

The slider can provide maximum performance if it is connected directly to the ventilation shaft. Considering that the hood with an air duct for the kitchen can realize better air circulation in the room, it is worth giving preference to this particular installation option.

If it is not possible to connect the device to ventilation, then before choosing the model you like, the seller should clarify whether it is possible to purchase a separate charcoal filter for this type of hood from them. Since it happens that, having bought a certain model, in the future it is very problematic to find a filter suitable for it.

The advantage of using the recirculation mode is the preservation of the natural movement of air masses in the room. Perhaps this is due to the fact that the ventilation hole of the mine is not covered by the air duct. Such an installation of the hood allows the air in the room to move without stagnation, regardless of whether the device is turned on or not. Maintaining natural air exchange in the kitchen also helps maintain a constant room temperature.

The fat filter is always active, no matter what mode the slider is in. But it is not required to change it throughout the entire service life of the hood. You just need to take care of it regularly, cleaning it from fatty deposits.

Advantages of pull-out models

Telescopic hoods for the kitchen have several advantages in comparison with models of other types of household appliances in question. The main ones are the following points:

  • higher productivity;
  • low noise level during operation;
  • the device can be compactly placed in any part of the kitchen;
  • with a direct connection to the ventilation shaft, there is no need to change filters;
  • due to the pull-out panel, the hood provides a large air intake area;
  • due to its small size, the device is practically invisible when switched off.

The advantages of retractable hoods are not few, but there are also disadvantages. For example, when operating in recirculation mode, it is necessary to replace the carbon filters. Also, a disadvantage in the budget options of such devices may be one of their main advantages, namely, the sliding panel mechanism.

In some cheap models, it is not reliable enough, which will require a more careful attitude to the device. Quickly, on inexpensive models, a backlash may appear in the pull-out panel, which will complicate interaction with the device. To choose a decent pull-out hood for the kitchen, you will need to pay attention to many parameters and various little things that affect the reliability of this technique.

The main criteria for choosing a retractable hood

Mostly all types of kitchen hoods are one of the interior elements. In the case of built-in options, the model should fit harmoniously in a wall cabinet. Therefore, before choosing a retractable hood, it is better to first completely decide on the design of the kitchen and the project of the furniture set.

There is no need to customize the project specifically for the hood since there are options for stand-alone and built-in sliders. For the correct subsequent installation of equipment, it is necessary to take into account its dimensions. The most common width of retractable hoods is 60 cm. The more compact options are 50 cm wide, and the overall ones are 90 cm.

It is possible to achieve good performance from the hood if it completely covers the area of ​​the stove in the open (extended) state. Based on this, when drawing up a kitchen project and choosing a stove or hob, you need to take this moment into account. The performance also depends on the power of the motor installed in the device.

Calculating the required power is quite simple on your own. To do this, you need to use the formula: V × 12, where V is the volume of the room, and 12 is how many times the air in the kitchen should change in one hour. Since the power of some models of hoods may not fully correspond to the declared one, it is better to multiply the resulting value by the correction factor, which is 1.3.

 

Especially, the use of the coefficient is necessary if it is planned to connect the hood to ventilation through an air duct.

The main criteria for choosing a retractable hood

Pull-out hoods can be very powerful. Some options are capable of driving up to 100 cubic meters of air through themselves in an hour. m. Experts recommend choosing a turbine-type hood, considering them to be more productive. But common models with one or two motors also do a decent job of cleaning the air in the kitchen.

It is also important to consider when choosing the noise level that occurs during the operation of the retractable hood. Generally, the more powerful the model, the louder it will work. Devices with good power, relatively quiet motors, and good sound insulation are more expensive. The noise level also depends on the operating mode of the hood, as well as on the features of its connection.

When operating in recirculation mode, the unit is louder. When connecting the hood to the ventilation shaft, it must be borne in mind that the longer and more curving the air duct is, the more noise will occur during the operation of the device. Based on this, when designing places for the installation of household appliances, it is necessary to take care of the maximum proximity of the ventilation shaft to the installation point of the hood.

If you want to purchase a sufficiently quiet retractable hood for the kitchen, you need to focus on a noise level of 40-45 dB. This and other characteristics of the model you like should be looked for in the technical documentation that comes with the device.

Additional model capabilities

Hoods are purchased for long service life, so it is worthwhile to correctly assess the presence of additional options in the device. If they are not needed right away, then they may be needed in the future. The manufacturer produces models with different functionality: basic, medium, and full (advanced).

For example, in addition to the backlight, built-in sensors, touch controls, some models can work fully in automatic mode, independently controlling the state of the air in the kitchen, and based on this, adjust the intensity of their actions.

Certain models of hoods, in addition to several operating speeds, have an intensive (turbo) mode. It is used to remove particularly strong vapors and odors. It can also operate in automatic mode. When the concentration of vapors in the room is high, the hood will automatically switch to turbo mode. After removing most of the vapors, the sensor will be triggered and the device will return to normal operation.

The ability of the hood to work in interval mode will help to gradually remove odors from the room. The hood itself will periodically turn on for several minutes and turn off after ventilating the room.

When choosing a retractable hood, you should pay attention to the type and number of lamps installed in the device. Modern models are equipped mainly with LED backlighting. In advanced hoods, it is possible to adjust the brightness level, and certain models can adjust the brightness themselves depending on the illumination of the kitchen. The presence of the light focusing option will allow both to illuminate the work surface in a directional way, and to scatter the light throughout the entire kitchen or part of it.

Inexpensive hoods are equipped with incandescent lamps, which have a short lifespan and consume a lot of electricity. Models equipped with fluorescent lamps give a brighter light, but not yellow, but white. These lamps have a longer working life, but hoods with them are more expensive. If the installed light bulb does not have a standard shape, then it may be difficult to find a replacement for it. There are hoods with halogen bulbs, which are similar in many respects to LED devices.

If you want to choose the most convenient hood with an air duct for the kitchen, you should consider models with remote or remote control. In the first case, the device is equipped with remote control, and in the second, a Wi-Fi module, which will allow you to control equipment from a tablet or smartphone. The presence of such an opportunity will eliminate the need to approach each time and reach for the equipment. You can turn on, turn off, change operating modes and other settings completely from the remote control or from a mobile device by installing a special application on it.

Things to consider when installing

The most common options for pull-out hoods built into a wall cabinet. If you plan to use the slider in recirculation mode, then it is important to take care of the possibility of free movement of air masses, correctly choosing the dimensions of the hood and furniture.

 

Having correctly built the device into the cabinet when it is turned off, it will hardly be noticeable.

 

When connecting the hood to a ventilation shaft, the duct can be masked by removing the lower and upper parts of the cabinet. Provided that the shaft is directly above the hood, the outgoing pipe will not be visible. If the ventilation shaft is remote from the installation site, then it is unlikely that it will be possible to completely mask the pipe.

When choosing a smaller pipe, trying to reduce its visibility, it is worth remembering that a smaller duct cross-section and a large number of turns in the route will reduce the performance of the equipment, and also increase the noise level. A hood with an air duct for the kitchen is preferable, but with a remote connection point to the ventilation system, the performance will be similar to the operation in recirculation mode.

The following types of pipes are used as materials for laying the air ductTelescopic hoods are not always compact in size. The height of some models exceeds 40 cm, which will require the installation of almost the entire structure in a wall cabinet, leaving only a pull-out panel outside. The complete documentation for the hood usually indicates the required dimensions of the cabinet and the required free space.

When mounting the slider, do not forget about fire safety. When installed above gas equipment with an open fire, the distance from the stove to the hood must be at least 65 cm. For electric stoves, this distance must be at least 55 cm.

The following types of pipes are used as materials for laying the air duct:

  • corrugated – the simplest, but at the same time unreliable option, since the corrugation can be easily damaged;
  • plastic – have sufficient reliability and aesthetic appearance, there are round or rectangular sections;
  • metal – a reliable option, but due to its characteristics, it is practically not used for laying an air duct for kitchen hoods in houses and apartments.

When choosing the type of material for the duct device, it is necessary to be guided by the parameters of the exhaust device branch pipe. If it is impossible to place the hood next to the ventilation duct, a plasterboard structure can be made to mask the pipe.

In order not to disrupt the natural air circulation in the room, the air duct should not be connected directly to the ventilation grill with a check valve, but to make a vertical box under the ceiling in which the air duct should be laid. A ventilation grill is installed in the same box.

Having mounted the hood in this way, in addition to removing fumes during cooking, the kitchen will be constantly ventilated by natural ventilation.

 

When laying the air duct from pipes, you will additionally need adapters for joining them. Metal elements are connected with an overlap, and plastic elements are connected with a groove-ridge method. You can ensure the tightness of the joints using a sealant.

It is better to entrust the power supply to the retractable hood to specialists. The connection point must be brought in as close as possible. But do not forget that placing wires above the stove can cause a fire.

Drawer hoods will be a good solution for small kitchens. They are not much inferior to large, dimensional devices, they can also have decent functionality and power, but at the same time save space. Having made a choice in favor of the slider, correctly installing and connecting it, the hood will fully cope with its task, clearing the air in the kitchen from vapors and odors.

Scroll to Top